Toshiba e-STUDIO2008A Service Manual page 163

Notes:
When replacing the parts or performing
machine refreshment, apply 1 rice-sized
grain of white grease (Molykote HP-300) to
the bushings [2] of the bypass separation
roller.
4.5.4 Paper size detection board
(1) Open the bypass tray [1] and pull out the
slide tray [2].
(2) Remove 1 screw from back side of the
bypass tray. Take off the paper size detection
board cover [3].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-112
Fig. 4-113
Fig. 4-114
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 43
[2]
DISASSEMBLY AND REPLACEMENT
4