Toshiba e-STUDIO2008A Service Manual page 108

3.15 PAPER EXIT SECTION/REVERSE SECTION
3.15.1 General Description
For 20ppm/25ppm/30ppm, a sheet of paper with the toner fused on is transported to the inner tray or
Automatic Duplexing Unit (ADU) by switchbacking. in the paper exit section.
For 35ppm/45ppm/50ppm, a sheet of paper with the toner fused on is transported to the inner tray, but
the exit roller does not switchback.
For 35ppm/45ppm/50ppm, the exit roller has the offset function and the paper position is shifted apart
from one another back and forth.
The reverse section is only installed for 35ppm/45ppm/50ppm.
It is a path only for switchbacking to the ADU to enhance the high-speed printing.
The reverse section has the reverse gate which switches the transport path to the paper exit section or
the reverse section.
[4]
[2]
[3]
[7]
[1]
[1]
[5]
[5]
[6]
[6]
[ 20ppm/25ppm/30ppm ] [ 35ppm/45ppm/50ppm ]
Fig. 3-38
[1] Exit roller
[2] Reverse sensor
[3] Reverse gate solenoid
[4] Reverse roller
[5] ADU entrance sensor
[6] Exit sensor
[7] Reverse gate
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 62