Toshiba e-STUDIO2008A Service Manual page 196

4.5.32 High speed transport clutch (CLT5)
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect 3 connectors [1] and release the
harness from the harness guide.
(3) Remove 3 clips.
(4) Remove 3 bushings and 2 screws [2], and
then take off the clutch cover [3].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-208
Fig. 4-209
Fig. 4-210
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 76