Toshiba e-STUDIO2008A Service Manual page 274

4.12.4 ADU guide assembly <20ppm/25ppm/30ppm>
(1) Remove the transfer unit.
 P. 4-114 "4.9.1 Transfer unit"
(2) Remove the bypass feed clutch.
 P. 4-151 "4.12.2 Bypass feed clutch
(CLT2)"
(3) Remove the ADU middle cover.
 P. 4-157 "4.12.6 ADU middle cover
<20ppm/25ppm/30ppm>"
(4) Remove 1 ground cable fixing screw.
(5) Remove 4 screws and take off the ADU
guide assembly [1].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 154
Fig. 4-413
Fig. 4-414