Toshiba e-STUDIO2008A Service Manual page 271

4.12.2 Bypass feed clutch (CLT2)
(1) Remove the automatic duplexing unit.
 P. 4-149 "4.12.1 Automatic duplexing unit
(ADU)"
(2) Release the harness [1] from the harness
guide.
(3) Remove 1 screw and take off the clutch
cover [2].
(4) Remove 1 bushing [3] and 1 leaf spring [4].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-405
Fig. 4-406
Fig. 4-407
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 151
DISASSEMBLY AND REPLACEMENT
4