Toshiba e-STUDIO2008A Service Manual page 157

4.5 Paper Feeding System
4.5.1 Bypass unit
(1) Remove the right front cover.
 P. 4-4 "4.1.9 Right front cover"
(2) Remove the right rear cover.
 P. 4-4 "4.1.10 Right rear cover"
(3) Close the side cover.
(4) Remove 4 screws and take off the stay [1].
(5) Open the bypass tray [2] and pull out the
slide tray [3].
(6) Remove 1 screw from back side of the
bypass tray. Take off the paper size detection
board cover [4].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-95
Fig. 4-96
Fig. 4-97
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 37
DISASSEMBLY AND REPLACEMENT
4