Toshiba e-STUDIO2008A Service Manual page 141

(4) Remove 3 screws and take off the CCD lens
unit [3].
Notes:
1. The CCD lens unit is adjusted finely, so
the re-adjustment or replacement of some
parts are impossible in the field. The lens
unit must be replaced on a unit basis.
2. Handle the lens unit with care. Do not
hold the adjustment unit or lens.
3. Count the number of lines [4] and write it
down for later reference before removing
the CCD lens unit. When installing the
CCD lens unit, the same number of lines
needs to be visible.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-54
Fig. 4-55
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 21
DISASSEMBLY AND REPLACEMENT
4