Toshiba e-STUDIO2008A Service Manual page 423

6.6.13 RADF scan noise reduction (Scanning Function)
The reduction amount of color streaks generated when FS-08-8300 (ADF scan noise reduction) is set
to 0, 1 or 2 can be adjusted with the following codes.
Color
Original mode
Text/
Text Photo
photo
8413 8414 8415
Black
Original mode
Text/
Text Photo
photo
7401 7402 7403
<Procedure>
Procedure is same as that of  P. 6-24 "6.4.2 Density adjustment".
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Item to be
adjusted
User
custom
8412 RADF scan noise
reduction
Item to be
adjusted
Gray User
scale custom
7404 7400 RADF scan
noise
reduction
6 - 39
< 05 Adjustment Mode >
Remarks
When the value decreases, the effect of reducing
streaks becomes larger.
When the value increases, the effect of reducing
streaks becomes smaller.
When "0" is set, this function is disabled.
Acceptable values: 0 to 200
(Default: 100)
Notes:
If too small a value is set, the text may not
be printed clearly.
Remarks
When the value decreases, the effect of
reducing streaks becomes larger.
When the value increases, the effect of
reducing streaks becomes smaller.
When "0" is set, this function is disabled.
Acceptable values: 0 to 200
(Default: 100)
Notes:
If too small a value is set, the text
may not be printed clearly.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6