Toshiba e-STUDIO2008A Service Manual page 412

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO2008A:

Table of Contents

Adjustment of image density

The image density level can be set at the following codes.

Performs FS-05.

Key in a code and press the [START] button.

Key in the sub code (0, 1, 2, 3 or 4), and press the [START] button.

Key in an adjustment value.

(To correct the keyed-in value, press the button.)

Press the [OK] button to store the value in memory. The equipment goes back to the ready state.

For resetting the value, repeat step (2) to (5).

Press the [TEST COPY] button and then select an original mode. Then press the [START] button

to perform test copying.

If the desired image density has not been attained, repeat step (2) to (7).

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A

SETTING / ADJUSTMENT

Item to be adjusted

Adjustment of image

When the value is decreased, text becomes lighter.

Acceptable values: 0 to 10

Set not to reverse the large and small

number of the setting value

corresponding to the sub code.

Ex.) When the image density level for

7218-0, 7218-1, 7218-2, 7218-3, and

7218-4 is assumed to be "A", "B", "C",

"D", and "E" respectively, they should

have the following correlation:

Remember that the image

specifications and life span of the

replacing parts may not meet the

standard when the setting value is

changed from the default value.

< 05 Adjustment Mode >

Show Quick Links

Table of Contents