Toshiba e-STUDIO2008A Service Manual page 350

5.11 [FAX]
Adjustment and setting of the fax functions can be performed.
Select [FAX] in the FS Menu and press [NEXT]. The following modes are displayed.
11 FAX CLEAR MODE
12 FAX LIST PRINT MODE
13 FAX FUNCTION MODE
19 RAM EDIT MODE
Notes:
The data automatically received during the self-diagnostic mode are sometimes not printed.
Therefore, be sure to disconnect the modular code form the line connector (LINE1, LINE2) of the
equipment before starting the self-diagnostic mode. After the equipment is released from the
self-diagnostic mode, reconnect the modular code.
5.11.1 [11 FAX CLEAR MODE]
(1) Select [FAX] in the FS Menu and press [NEXT]. Select [11 FAX CLEAR MODE] and press
[NEXT].
[SET UP FAX] and [CUSTOM INITIALZE] are displayed.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
Fig.5-20
© 2015 TOSHIBA TEC CORPORATION All rights reserved
5 - 32