Toshiba e-STUDIO2008A Service Manual page 325

5.3 Service UI
5.3.1 Overview
Each mode of the self-diagnostic codes can be used by selecting the keyword of the screen in the
Service UI.
The codes which are used frequently can be selected in the Service UI.
The Service UI can be used in the following modes in the FS Menu.
• 05 ADJUSTMENT MODE
• 08 SETTING MODE
Notes:
Not all codes can be used in the Service UI.
For the codes available with the Service UI, refer to the "Self-diagnostic code list" (separate
document).
5.3.2 Operation procedure
(1) Start the FS Menu. Select the mode of the above Service UI and press [NEXT].
(2) Select the item whose setting is to be changed and press [NEXT] until the code number is
displayed. Press [OK]. The operation of the selected code starts.
5.3.3 Starting the FS Menu from the normal mode
If the [Tool] icon is displayed on the USER FUNCTIONS menu of the normal mode, the FS Menu can
be started.
(1) Turn the power ON.
(2) Enter the user name and password if necessary. *
(3) Press [USER FUNCTIONS].
(4) Press the [Tool] icon on the upper left of the screen for at least 3 seconds.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig.5-6
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
5 - 7
SELF-DIAGNOSTIC MODE
5