Toshiba e-STUDIO2008A Service Manual page 149

Notes:
• When installing, install the flat cable [4] to
the harness guide [5].
• When installing, make sure that the wire
[7] is placed on the notch [8] of carriage-
1.
• After installing, move carriage-1 to the
leftmost side and check the flat cable [4]
for any twists.
4.3.10 Carriage wire, carriage-2
[A] Carriage wire, carriage-2
(1) Remove carriage-1.
 P. 4-27 "4.3.9 Carriage-1"
(2) Move carriage-2 to the center.
(3) Attach the wire holder jig [2] to the wire
pulley [1] to prevent the wire from coming
loose.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-75
Fig. 4-76
Fig. 4-77
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 29
DISASSEMBLY AND REPLACEMENT
4