Toshiba e-STUDIO2008A Service Manual page 92

[ 4 ] Operation of bypass pickup roller
The driving force transmitted through the bypass feed clutch (CLT2) is transmitted to the bypass feed
roller through the shaft. The roller is rotated by this driving force.
[1] Main motor
[2] Gear
[3] Bypass feed clutch
[4] Bypass feed roller
[ 5 ] Separation of paper
This model is equipped with a separation roller which works to prevent multiple paper feeding. The
separation roller is pushed to the paper feed roller by the spring force.
When two or more sheets of paper are fed, since the friction between two sheets of paper is smaller
than that between a sheet and the separation roller, the lower sheets are not transported any further
while the uppermost one is transported by the paper feed roller.
[1] Bypass feed roller
[2] Bypass separation roller
[3] Spring
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
OUTLINE OF THE MACHINE
[1]
[4]
Fig. 3-28
[2]
Fig. 3-29
3 - 46
[2]
[3]
[1]
[3]
© 2015 TOSHIBA TEC CORPORATION All rights reserved