Toshiba e-STUDIO2008A Service Manual page 356

5.12.3 Checking of the LCD display, hard keys and digital keys
[A] Checking of the LCD display
By pressing the icon on the touch panel, the LCD display confirmation screen is displayed.
[Tips]
• The screen is returned to this one when the [HOME] button is pressed on each screen.
[B] Checking of the hard keys
By pressing each hard key, a particular text is displayed and the blinking condition of the LED is
changed.
The following table shows each text and performance when the key is pressed.
Hard key
ON/OFF
(Pressing for at least
0.5 seconds)
ENERGY SAVER
ACCESS
HOME
Programable key 1
Programable key 2
FUNCTION CLEAR
START
The text is displayed only while the key is being pressed. Each LED is turned OFF only while the key is
being pressed.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
Text
MAIN POWER
ENARGY SAVER
ACCESS
HOME
P-1
P-2
FUNCTION CLEAR
START
5 - 38
Performance
The [MEMORY RX] LED is turned OFF.
The [ENERGY SAVER] LED is turned OFF.
The [PRINT DATA] LED is turned OFF.
The [!] LED is turned OFF.
The LCD back light is made darker by each
pressing. (10 levels)
The LCD back light is made lighter by each
pressing. (10 levels)
The [FUNCTION CLEAR] LED is turned
OFF.
The [START] LED is turned OFF.
© 2015 TOSHIBA TEC CORPORATION All rights reserved