Toshiba e-STUDIO2008A Service Manual page 145

(4) Remove 2 screws and take off the scan
motor assembly [1].
Notes:
When installing the scan motor, use the belt
tension jig.
 P. 6-51 "6.9.3 Belt tension adjustment of
the Scan motor"
(5) Remove 2 screws and take off the scan
motor [2].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-64
Fig. 4-65
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 25
DISASSEMBLY AND REPLACEMENT
4