Toshiba e-STUDIO2008A Service Manual page 245

(4) Remove 3 screws and take off the cover [2].
(5) Remove 5 springs [3] and take off the 5
separation finger [4].
Notes:
Remove the separation finger in the following
procedure.
1. Lift up the separation finger and slide it
toward you.
2. Slide the separation finger toward the
front side and turn it as twist.
3. Remove the separation finger from the
groove.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-337
Fig. 4-338
Fig. 4-339
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 125
DISASSEMBLY AND REPLACEMENT
4