Toshiba e-STUDIO2008A Service Manual page 300

(13) Lift the equipment up and remove the large
capacity feeder.
4.13.5 KN-5005 (Bridge Kit)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove the connecting port cover.
(5) Disconnect 1 connector.
(6) Remove 1 screw and take off the front cover
of the bridge kit.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 180
Fig. 4-489
Fig. 4-490
Fig. 4-491