Toshiba e-STUDIO2008A Service Manual page 183

Notes:
When replacing the parts or performing
preventive maintenance, apply 1 rice-sized
grain of white grease (Molykote HP-300) to
the place [4] shown in the figure, and apply
half a rice-sized grain of white grease
(Molykote HP-300) to the 2 places [5] shown
in the figure.
4.5.18 1st drawer paper feed roller, separation roller, and pick-up
roller
(1) Remove the 1st drawer paper feed unit.
 P. 4-58 "4.5.14 1st drawer paper feed
unit"
(2) Slide the guide [1] to the front side.
(3) Release 3 latches, and remove the
separation roller [2], feed roller [3], and pick-
up roller [4].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
[4]
Fig. 4-169
Fig. 4-170
Fig. 4-171
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 63
[5]
DISASSEMBLY AND REPLACEMENT
4