Toshiba e-STUDIO2008A Service Manual page 215

(3) Remove the drum [3].
Notes:
1. Be careful not to touch, spit or scratch the
drum surface.
2. Avoid direct light. Place the drum in a
dark place immediately after taking off.
3. Be careful not to touch or scratch the
edge of the cleaning blade.
4. Be sure to apply patting powder
(lubricant) to the entire surface of the
drum when it is replaced or it is installed/
removed from the cleaner.
4.7.9 Drum cleaning blade
(1) Remove the drum.
( P. 4-94 "4.7.8 Drum")
(2) Remove 2 screws and take off the drum
cleaning blade [1].
Notes:
Be careful not to touch or scratch the edge of
the drum cleaning blade [1].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-255
Fig. 4-256
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 95
DISASSEMBLY AND REPLACEMENT
4