Toshiba e-STUDIO2008A Service Manual page 375

Service technician reference
This is a system that accumulates data between clearing the counter of the service technician
reference by service technician and subsequently clearing the same counter.
Clearing of the counter of the service technician reference is performed in the FS-08-6502.
• Print count (number of output pages)
The number of output pages shown at the pixel counter is counted after converting all paper sizes to
the standard paper size (A4/LT). Printing on other than the standard size is converted by paper area
ratio. The standard paper size is set in the FS-08-6500.
The examples of conversion are as follows:
Ex.)
"1" is added to the print count when printing on A4/LT size.
"2" is added to the print count when printing on A3/LD size. (area ratio to A4/LT: 200%)
"1.49" is added to the print count when printing on B4 size. (area ratio to A4: 149%)
"1.27" is added to the print count when printing on LG size. (area ratio to LT: 127%)
• Pixel count (%)
Pixel count (%) shows the ratio of the emitting pixels of the laser to all pixels on standard paper.
The examples of pixel count are as follows:
Notes:
In the following examples, 'solid copy' is considered to be 100%. But since the image has 4
margins, it never becomes 100% actually.
Ex.)
Printing 5 pages on A4/LT size with solid copy (laser emit to all pixels.)
 Pixel count: 100%, Print count: 5
Printing 5 pages on A4/LT size with blank copy (laser never emit.)
 Pixel count: 0%, Print count: 5
Printing 2 pages on A4/LT size with solid copy (laser emit to all pixels.)
Printing 2 pages on A4/LT size with blank copy (laser never emit.)
 Pixel count: 50%, Print count: 4
Printing 3 pages on A4/LT size with 6% of laser emission
Printing 1 page on A4/LT size with 2% of laser emission
 Pixel count: 5%, Print count: 4
Printing 2 pages on A3/LD size with solid copy (laser emit to all pixels.)
 Pixel count: 100%, Print count: 4
Printing 2 pages on A3/LD size with 6% of laser emission
 Pixel count: 6%, Print count: 4
• Average pixel count (%) and latest pixel count (%)
There are 2 types of the value calculated as the pixel count, average pixel count (%) and latest pixel
count (%).
Average pixel count (%)
The average value of all pixel count data after each reference data is cleared is calculated and
displayed.
Latest pixel count (%)
The value is displayed for printing just before the pixel counter is confirmed.
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
5 - 57
SELF-DIAGNOSTIC MODE
5