Toshiba e-STUDIO2008A Service Manual page 486

• Counter indicating the current number of prints and driving time
FS-08-6194: Current value of PM counter [process unit (K)]
FS-08-6195: Current value of PM time counter [process unit (K)]
FS-08-5568: Current value of PM counter [developer material (K)]
FS-08-5569: Current value of PM time counter [developer material (K)]
FS-08-5576: Current value of PM counter [parts other than the PM parts of the process unit]
FS-08-5577: Current value of PM time counter [parts other than the PM parts of the process unit]
• Setting value which determines the display conditions
FS-08-6198: Switching of output pages/driving counts at PM [process unit (K)]
FS-08-5581: Switching of output pages/driving counts at PM [developer material (K)]
FS-08-5585: Switching of output pages/driving counts at PM [parts other than the PM parts of the
process unit]
For example, you can set the conditions of the PM display of the [process unit (K)] as follows.
PM display by specifying the
number of prints
PM display by specifying the
driving time
PM display by the earlier one:
when the number of prints or the
driving time reaches the set value
If the value of FS-08-9891 (Warning message on the touch panel when PM time has come) is set to "0:
No warning notification", the PM display is not performed regardless of the settings above. (Default
value is "1: Display warning notification")
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
PREVENTIVE MAINTENANCE (PM)
1. Key in "0" for FS-08-6198 (Switching of output pages/driving
counts at PM [process unit (K)]).
2. Key in the value of the number of prints for the PM display
other than "0" for FS-08-6190 (Setting value of PM counter
[process unit (K)]).
1. Key in "1" for FS-08-6198 (Switching of output pages/driving
counts at PM [process unit (K)]).
2. Key in the value of the driving time for the PM display other
than "0" for FS-08-6191 (Setting value of PM time counter
[process unit (K)]).
1. Key in "2" for FS-08-6198 (Switching of output pages/driving
counts at PM [process unit (K)]).
2. Key in the value of the number of sheets for the PM display
other than "0" for FS-08-6190 (Setting value of PM counter
[process unit (K)]).
3. Key in the value of the driving time other than "0" for FS-08-
6191 (Setting value of PM time counter [process unit (K)]).
7 - 2
© 2015 TOSHIBA TEC CORPORATION All rights reserved