Toshiba e-STUDIO2008A Service Manual page 420

6.6.6 Fine adjustment of black density
The density of black side on scanned image is adjusted at color-scanning.
Code Original mode
8314 Text / Photo
8315 Text
8316 Photo
8371 User custom
Notes:
Be careful for the value not to be too large since the gradation is reproduced worse in darker
side.
<Procedure>
The procedure is the same as that of  P. 6-34 "6.6.2 Density adjustment".
6.6.7 RGB conversion method selection
The color space conversion method of image is decided at color-scanning.
Code Original mode
8319 Text /Photo
8320 Text
8321 Photo
8372 User custom
<Procedure>
The procedure is the same as that of  P. 6-34 "6.6.2 Density adjustment".
6.6.8 Adjustment of saturation
The saturation of the scanned image is adjusted for color-scanning.
Code Original mode
8324 Text / Photo
8325 Text
8326 Photo
8373 User custom
<Procedure>
The procedure is the same as that of  P. 6-34 "6.6.2 Density adjustment".
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
The larger the value is, the black side of the image becomes darker.
Acceptable values: 0 to 4 (Default: Text/Photo: 1, Others: 0)
0: sRGB, 1: AppleRGB, 2: ROMMRGB, 3: AdobeRGB
(Default: 0)
The larger the value is, the brighter the image becomes.
The smaller the value is, the duller the image becomes.
Acceptable values: 0 to 255 (Default: 128)
6 - 36
<05 Adjustment Mode>
Remarks
<05 Adjustment Mode>
Remarks
<05 Adjustment Mode>
Remarks
© 2015 TOSHIBA TEC CORPORATION All rights reserved