Toshiba e-STUDIO2008A Service Manual page 110

3.15.3 Exit Motor / Reverse Motor Drive
1. Exit Motor
The figure shown below is the layout of the driving gears of the exit roller.
Reverse
2. Reverse Motor (only installed for 35ppm/45ppm/50ppm)
The figure shown below is the layout of the driving gears of the reverse roller.
Forward
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
OUTLINE OF THE MACHINE
Exit roller
Forward
Fig. 3-39
Reverse roller
Reverse
Fig. 3-40
3 - 64
Exit motor
Reverse motor
Upper transport roller
© 2015 TOSHIBA TEC CORPORATION All rights reserved