Toshiba e-STUDIO2008A Service Manual page 201

4.5.38 Paper feed drive unit
(1) Remove the low speed transport clutch.
 P. 4-78 "4.5.33 Low speed transport
clutch (CLT6)"
(2) Disconnect 3 connectors [3].
(3) Remove 1 harness clamp [1] and disconnect
1 connector [2].
(4) Release the harness from the harness guide.
(5) Remove the spring [3].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-222
Fig. 4-223
Fig. 4-224
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 81
DISASSEMBLY AND REPLACEMENT
4