Toshiba e-STUDIO2008A Service Manual page 128

4.2 Control Panel
4.2.1 Control panel unit
(1) Remove the right top cover.
 P. 4-4 "4.1.8 Right top cover"
(2) Remove the front top cover.
 P. 4-5 "4.1.11 Front top cover"
(3) Remove the control panel lower cover.
 P. 4-5 "4.1.12 Control panel lower cover"
(4) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(5) Remove the SYS board cover.
 P. 9-1 "9.1.1 SYS Board cover"
(6) Disconnect 2 connectors from the SYS board
[1].
(7) Release 2 harnesses [2] located under the
scanner unit from 3 clamps.
(8) Lower the control panel unit [3].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-21
Fig. 4-22
Fig. 4-23
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 8