Toshiba e-STUDIO2008A Service Manual page 143

4.3.6 Exposure lamp (EXP)
(1) Remove the original glass.
 P. 4-18 "4.3.1 Original glass"
(2) Remove the front top cover.
 P. 4-5 "4.1.11 Front top cover"
(3) Move carriage-1 [1] to a place where you can
see the screw [2] through the frame hole.
Notes:
• Do not remove the black screw which can
be seen through the frame hole.
• To move the carriage, manually rotate the
drive pulley [3].
(4) Remove 1 screw [2].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-59
Fig. 4-60
Fig. 4-61
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 23
DISASSEMBLY AND REPLACEMENT
4