Toshiba e-STUDIO2008A Service Manual page 626

[E150] PFP upper drawer misfeeding (paper not reaching the PFP upper drawer feed sensor)
Classification
Paper misfeeding
Proce
Check item
dure
1 Open the PFP side cover.
Is there any paper in front
of the PFP upper drawer
feed sensor?
2 Is the PFP upper drawer
feed sensor working?
(Perform the input check
in the test mode: 03-
[FAX]OFF/[2]/[B])
3 Is the PFP upper drawer
feed clutch working?
(Perform the output check
in the test mode: 03-226)
4 PFP upper drawer feed
roller
Separation roller
Pickup roller
Parts to be replaced
PFP upper drawer feed sensor
PFP board
LGC board
PFP upper drawer feed clutch
PFP upper drawer feed roller
Separation roller
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
Jam not reaching the PFP upper drawer feed sensor
Result
Yes Remove the paper.
No
Yes
No • Check if the connector of the PFP upper
drawer feed sensor is disconnected.
• Check if either of the connectors CN241 or
CN243 on the PFP board is disconnected.
• Check if the connector CN318 on the LGC
board is disconnected.
• Check if the connector pins are
disconnected and the harnesses are open
circuited.
• Check if the conductor patterns on the PFP
board and LGC board are short circuited or
open circuited.
• Replace the PFP upper drawer feed sensor.
• Replace the PFP board.
• Replace the LGC board.
Yes
No • Check if the connector of the PFP upper
drawer feed clutch is disconnected.
• Check if any of the connectors CN241 and
CN247 on the PFP board is disconnected.
• Check if the connector CN318 on the LGC
board is disconnected.
• Check if the connector pins are
disconnected and the harnesses are open
circuited.
• Check if the conductor patterns on the PFP
board and LGC board are short circuited or
open circuited.
• Replace the PFP upper drawer feed clutch.
• Replace the PFP board.
• Replace the LGC board.
• Check the PFP upper drawer feed roller,
separation roller and pickup roller.
Replace them if they are worn out.
8 - 88
Error content
Measure
Remark
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Next
Step
2
3
4