5.5
[04 TEST PRINT MODE]
The embedded test pattern can be printed out.
<Operation procedure>
[FS]
(Code)
[04]
Notes:
•
When an error occurs, it is indicated on the panel, but the recovery operation is not performed.
Turn OFF the power and then back ON to clear the error.
•
During test printing, the [CLEAR] button is disabled when "Wait adding toner" is displayed.
Refer to the "Self-diagnostic code list" (separate document) for the codes available in the [04
TEST PRINT MODE].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
(Media selection)
[START]
5 - 11
Operation
[CLEAR]
Continuous
Test Printing
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
[POWER]
OFF/ON
(Exit)
5