Toshiba e-STUDIO2008A Service Manual page 267

(3) Remove the 2 springs [2] applying pressure
to the idling roller.
(4) Remove the 1 gear [3], 1 clip [4], 1 bushing
(metal) [5], and 1 bushing (resin) [6], then
take off the upper exit roller [7].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-393
[7]
[5]
[4]
Fig. 4-394
Fig. 4-395
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 147
DISASSEMBLY AND REPLACEMENT
4