Toshiba e-STUDIO2008A Service Manual page 227

4.8.7 Guide roller / Developer sleeve
(1) Remove the developer material.
( P. 4-104 "4.8.2 Removing developer
material")
(2) Remove 2 screws and take off the recovered
toner supply unit.
(3) Remove 1 screw and take off the recovered
toner drive unit. Remove 1 gear.
(4) Remove 2 plate springs fixing the doctor
sleeve on its both ends.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-289
Recovered toner drive unit
Fig. 4-290
Plate spring
Fig. 4-291
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 107
Recovered toner
supply unit
Gear
Plate spring
DISASSEMBLY AND REPLACEMENT
4