Toshiba e-STUDIO2008A Service Manual page 232

(5) Take off the mixers-2 and -3.
(6) Remove 2 bushings and 2 oil seals on the
front side.
(Replacement of Oil Seal:  P. 4-113 "4.8.9
Replacement of oil seal")
(7) Remove the end section of the mixer-1.
(8) Remove the bushing and oil seal.
(Replacement of Oil Seal:  P. 4-113 "4.8.9
Replacement of oil seal")
(9) Take off the mixer-1.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Mixer-2
End section of mixer-1
Bushing
Mixer-1
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 112
Mixer-3
Fig. 4-306
Oil seal
Bushing
Fig. 4-307
Oil seal
Fig. 4-308
Fig. 4-309