Toshiba e-STUDIO2008A Service Manual page 419

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO2008A:

Table of Contents

Sharpness adjustment

If you want to make scan images look softer or sharper, perform the following adjustment. The

adjustment can be made for each of the color modes and original modes independently.

You have to make adjustment by balancing between moire and sharpness.

The procedure is the same as that of  P. 6-34 "6.6.2 Density adjustment".

Background adjustment

The adjustment level of background center value is adjusted.

Original mode

If the setting value is changed, each step for the background adjustment performed by using the

buttons will be affected.

[2] Black/Grayscale

The procedure is the same as that of  P. 6-34 "6.6.2 Density adjustment".

Original mode

The larger the value is, the sharper the image becomes; while

the smaller the value is, the softer the image becomes.

The smaller the value is, the less moire tends to appear.

The acceptable values are 0 to 255 (Default: 128)

The larger the value is, the background becomes darker. The smaller the value

is, the background becomes lighter.

Acceptable values: 0 to 255 (Default: 128)

Original mode

The larger the value is, the background becomes

darker. The smaller the value is, the background

becomes lighter.

Acceptable values: 0 to 255 (Default: 128)

<05 Adjustment Mode>

<05 Adjustment Mode>

<05 Adjustment Mode>

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A

SETTING / ADJUSTMENT

Show Quick Links

Table of Contents