Toshiba e-STUDIO2008A Service Manual page 410

6.4.5 Setting range correction
The values of the background peak in the range correction can be switched to "varied" or "fixed" in the
following codes. If they are fixed, the range correction is performed with standard values.
The values of the background peak affect the reproduction of the background density.
Original mode
Text/
Text
Photo
7286 7287
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P. 6-24 "6.4.2 Density adjustment".
6.4.6 Adjustment of smudged text in black
The smudged/faint text can be set at the following codes.
Original mode
Text/ User
Text
Photo custom
7097 7098 7252
<Procedure>
Procedure is same as that of  P. 6-24 "6.4.2 Density adjustment".
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
Item to be adjusted
User Custom
7237 Manual density mode
Item to be adjusted
Adjustment of smudged
text in black
6 - 26
< 05 Adjustment Mode >
0: Background peak / fixed
1: Background peak /
varied
< 05 Adjustment Mode >
Remarks
When a larger value is set, black text becomes
thinner. When a smaller value is set, it becomes
thicker.
Acceptable values: 0 to 4 (Default: 2)
Notes:
Remember the image specifications and life
span of the replacing parts may not meet
the standard when the setting value is
changed from the default value.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Remarks