Toshiba e-STUDIO2008A Service Manual page 238

4.9.5 Separation needle
(1) Remove the transfer roller unit.
 P. 4-116 "4.9.3 Transfer roller unit"
(2) Peel off the double-faced tape, and then
remove the cover [1].
Notes:
When installing, insert the cover [1] into the
lower side of the power supply plate [2].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 118
Fig. 4-321
Fig. 4-322