Toshiba e-STUDIO2008A Service Manual page 421

6.6.9 Background offsetting adjustment for RADF
Item to be
RADF
adjusted
7025 Background
density processing
/ RADF scanning
(Black and white)
7026 Background
density processing
/ RADF scanning
(Color)
<Procedure>
The procedure is the same as that of  P. 6-34 "6.6.2 Density adjustment".
6.6.10 Adjustment of the capacity and image quality of SlimPDF
The compression quality or the resolution is adjusted to reduce the file capacity of a SlimPDF or
improve its quality.
Item to be
Code
adjusted
9104 Compression
quality of
SlimPDF
background
processing
<Procedure>
(1) Performs FS-05.
(2) Key in the codes to be adjusted and press the [START] button.
(3) Key in the adjustment value. (To correct a value once keyed in, press the [CLEAR] button.)
(4) Press the [OK] button to store the value in memory. -> The equipment goes back to the ready
state.
(5) Let the equipment restart. Acquire the SlimPDF file and check it.
(6) If the desired image quality has not been attained, repeat step (1) to (5).
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Adjusts the density of background for RADF scanning.
The smaller the adjustment value is, the lighter the background
becomes.
The larger the adjustment value is, the darker the background
becomes.
Acceptable values: 0 to 255 (Default: 128)
Adjusts the density of background for RADF scanning.
The smaller the adjustment value is, the lighter the background
becomes.
The larger the adjustment value is, the darker the background
becomes.
Acceptable values: 0 to 255 (Default: 128)
The smaller the value, the less the file capacity and the lower the image
quality becomes. The larger the value, the greater the file capacity and
the higher the image quality becomes.
Acceptable values: 0 to 10 (Default: 5)
6 - 37
<05 Adjustment Mode>
Remarks
< 05 Adjustment Mode >
Remarks
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6