Toshiba e-STUDIO2008A Service Manual page 146

4.3.8 Platen sensor (S20, S21)
(1) Remove the rear top cover.
 P. 4-6 "4.1.14 Rear top cover"
(2) Remove 5 screws.
(3) Disconnect 2 connectors and take off the
platen sensor assembly [1].
Notes:
When installing, be careful not to connect
each different connector.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 26
Fig. 4-66
Fig. 4-67
Fig. 4-68