Toshiba e-STUDIO2008A Service Manual page 352

[B] [CUSTOM INITIALZE]
Various FAX memories are initialized in the FAX clearing mode
• Memory Areas
- User registration area (SRAM)
ID registration area
Home position
- Image data area (HDD, SRAM)
Transmission file
Reception file
Image data file management area
F-code box information
- System setting area (NVRAM)
Settings in the [13 FAX FUNCTION MODE] Areas 100 - 999
<Operation procedure>
(1) Press [CUSTOM INITIALZE].
(2) Select the mode.
[INIT MEMORY]: Initializes the user registration area (SRAM) so that there are no data stored.
Initializes the system setting area (NVRAM) so that its value is reset to the default setting.
[CLEAR DATA]: Initializes the image data area (HDD, SRAM) so that there are no data stored.
[SYSTEM SETUP]: Initializes the system setting area (NVRAM) so that its value is reset to the
default setting.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
Fig.5-22
© 2015 TOSHIBA TEC CORPORATION All rights reserved
5 - 34