Toshiba e-STUDIO2008A Service Manual page 305

(13) Remove the finisher.
4.13.7 MJ-1110 (Saddle Stitch Finisher)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove the connector cover.
(5) Disconnect 1 connector.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-504
Fig. 4-505
Fig. 4-506
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 185
DISASSEMBLY AND REPLACEMENT
4