Toshiba e-STUDIO2008A Service Manual page 172

4.5.9 Registration roller (on the ADU side)
(1) Remove the transfer unit.
 P. 4-114 "4.9.1 Transfer unit"
(2) Remove 1 screw while holding the shaft of
the registration roller [1], and then remove
the bracket [2].
(3) Remove 1 screw while holding the shaft of
the registration roller [3], and then remove
the bracket [4].
(4) Remove the registration roller [5].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-139
Fig. 4-140
Fig. 4-141
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 52