Toshiba e-STUDIO2008A Service Manual page 131

4.2.3 USB harness/signal harness
(1) Remove the control panel unit.
 P. 4-8 "4.2.1 Control panel unit"
(2) Remove the hinge cover.
 P. 4-10 "4.2.2 Hinge cover"
(3) Lower 1 bracket and remove the USB
harness/signal harness [1] from 2 hooks.
(4) Remove 6 screws and take off the cover [2].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-29
Fig. 4-30
Fig. 4-31
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 11
DISASSEMBLY AND REPLACEMENT
4