Toshiba e-STUDIO2008A Service Manual page 147

(4) Release each 3 latches and remove the
platen sensor-1 [2] and -2 [3].
4.3.9 Carriage-1
(1) Remove the original glass.
 P. 4-18 "4.3.1 Original glass"
(2) Remove the front top cover.
 P. 4-5 "4.1.11 Front top cover"
(3) Move carriage-1 [1] to the leftmost side.
Make sure that the screws on carriage-1 can
be seen from the frame holes [2].
Notes:
To move the carriage, manually rotate the
drive pulley [3].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-69
Fig. 4-70
Fig. 4-71
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 27
DISASSEMBLY AND REPLACEMENT
4