Toshiba e-STUDIO2008A Service Manual page 428

(4) Install the high-voltage transformer jig and fix
it with 2 screws.
Notes:
Be careful not to let the connector and the
harness be caught.
(5) Fix the green cable of the high-voltage
transformer jig to the frame of the equipment.
(6) Install the door switch jig.
(7) Take off the transfer roller unit.
(8) Close the automatic duplexing unit.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
Process unit
Green cable
Door switch jig
© 2015 TOSHIBA TEC CORPORATION All rights reserved
6 - 44
Fig.6-21
Fig.6-22
Fig.6-23