Toshiba e-STUDIO2008A Service Manual page 126

4.1.13 Front right cover
(1) Remove the control panel lower cover.
 P. 4-5 "4.1.12 Control panel lower cover"
(2) Open the front cover.
(3) Remove 1 screw and take off the front right
cover [1] by lifting it up.
4.1.14 Rear top cover
(1) Remove the RADF or the platen cover.
(2) Remove the left top cover.
 P. 4-3 "4.1.5 Left top cover"
(3) Remove the right top cover.
 P. 4-4 "4.1.8 Right top cover"
(4) Remove 2 screws and take off the rear top
cover [1].
4.1.15 Rear cover
(1) Remove 6 screws and take off the rear cover
[1] by lifting it up.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-15
Fig. 4-16
Fig. 4-17
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 6