Toshiba e-STUDIO2008A Service Manual page 168

4.5.7 Registration sensor (S17), 1st transport sensor (S16)
(1) Remove the automatic duplexing unit.
 P. 4-149 "4.12.1 Automatic duplexing unit
(ADU)"
(2) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(3) Disconnect 1 connector [1].
(4) Open the feed cover [2].
(5) Remove 4 screws and take off the stay [3].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-127
Fig. 4-128
Fig. 4-129
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 48