Toshiba e-STUDIO2008A Service Manual page 257

(8) Remove the bearing [5]. Remove the fuser
roller [6] by pulling it out toward the front
side.
Notes:
• Be sure not to damage the fuser roller.
• When installing/removing the C-ring, not
to deform it by overextended.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-368
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 137
DISASSEMBLY AND REPLACEMENT
4