Toshiba e-STUDIO2008A Service Manual page 482

6.15.4 Saddle Stitch Skew Adjustment
Perform this adjustment when the folding position for saddle stitching is tilted.
(1) Turn OFF the power of the equipment.
(2) Open the cover, pull out the saddle stitch section, and then loosen the 2 screws.
(3) Rotate the adjustment screw slightly.
(4) Tighten the 2 screws, return the saddle stitch section, and then close the cover.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
Fig.6-106
Fig.6-107
Fig.6-108
© 2015 TOSHIBA TEC CORPORATION All rights reserved
6 - 98