Toshiba e-STUDIO2008A Service Manual page 243

4.10.2 Front side cover
(1) Remove the fuser unit.
 P. 4-121 "4.10.1 Fuser unit"
(2) Remove 2 screws and take off the front side
cover [1].
4.10.3 Rear side cover
(1) Remove the fuser unit.
 P. 4-121 "4.10.1 Fuser unit"
(2) Remove 2 screws and take off the rear side
cover [1].
Notes:
When installing the cover, put the harness
into the harness guide so that it will not be
pinched by the cover.
4.10.4 Fuser roller cover
(1) Remove the fuser unit.
 P. 4-121 "4.10.1 Fuser unit"
(2) Remove 2 screws, and take off the fuser
roller cover [1].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-331
Fig. 4-332
Fig. 4-333
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 123
DISASSEMBLY AND REPLACEMENT
4