Toshiba e-STUDIO2008A Service Manual page 248

4.10.9 Center thermistor (THMS1)/side thermistor (THMS2)/edge
thermistor (THMS3)
(1) Remove the front side cover.
 P. 4-123 "4.10.2 Front side cover"
(2) Remove the rear side cover.
 P. 4-123 "4.10.3 Rear side cover"
(3) Remove the fuser roller cover.
 P. 4-123 "4.10.4 Fuser roller cover"
(4) Remove 2 screws and take off the lamp
holder [1] on the rear side.
(5) Disconnect 3 connectors.
(6) Release 2 latches and remove the connector
bracket [2].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 128
Fig. 4-346
Fig. 4-347
Fig. 4-348