Toshiba e-STUDIO2008A Service Manual page 186

Feed roller
Pick-up roller
4.5.20 1st drawer detection switch (SW11)
(1) Remove the 1st drawer paper feed unit.
 P. 4-58 "4.5.14 1st drawer paper feed
unit"
(2) Remove the 2nd drawer paper feed unit.
 P. 4-61 "4.5.16 2nd drawer paper feed
unit"
(3) Remove the upper tray-up motor unit.
 P. 4-68 "4.5.22 Upper tray-up motor unit"
(4) Disconnect 1 connector [1] from the rear
side, and then release 2 latches.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-178
Fig. 4-179
Fig. 4-180
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 66