Toshiba e-STUDIO2008A Service Manual page 260

4.11.3 Paper exit unit <20ppm/25ppm/30ppm>
(1) Remove the fuser unit.
 P. 4-121 "4.10.1 Fuser unit"
(2) Remove 3 screws and take off the paper exit
unit [1].
4.11.4 Lower exit roller
(1) Remove the paper exit unit.
 P. 4-139 "4.11.2 Paper exit unit <35ppm/
45ppm/50ppm>"
(2) Remove 1 E-ring [1], 1 gear [2], and 1
bushing [3].
(3) Remove 1 E-ring [4] and 1 bushing [5].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 140
Fig. 4-374
Fig. 4-375
Fig. 4-376